Fence for 125 Linear Feet

This calculator is pre-filled to estimate the posts, pickets and rails for 125 linear feet of fence. Change any field to match your project, and enter your local price for a precise cost.

Quick answer: 125 linear feet of fence needs about 17 posts, 273 pickets and 32 rails (8 ft post spacing, 5.5" pickets).

Fence calculator

ft

How it's calculated: Posts = length ÷ 8 ft spacing, rounded up, plus one end post. Pickets = fence length in inches ÷ 5.5 in picket width; rails = 2 per section.

How to estimate fence

Frequently asked questions

What do I need for 125 linear feet of fence?

125 linear feet of fence needs about 17 posts, 273 pickets and 32 rails (8 ft post spacing, 5.5" pickets).

How many fence posts do I need?

Divide the length by your post spacing (commonly 8 ft) and add one for the final post.

How many pickets per foot of fence?

With 5.5 inch pickets butted tight, about 2.2 pickets per linear foot.

How deep should fence posts go?

A common rule is one-third of the above-ground height, with a 2 ft minimum and below the frost line - so a 6 ft privacy fence wants 8 ft posts set about 2 ft deep, deeper in cold climates.

How much concrete per post?

Figure one to two 80 lb bags per post for a typical privacy-fence hole; bigger holes and gate posts take more. Fast-setting mix poured dry into the hole and watered is the standard shortcut.

How soon can I build on set posts?

Fast-setting concrete can take rails in a few hours; standard mix is better left overnight. Racking a fresh post out of plumb is a mistake you live with for decades.

Do I need a permit for a fence?

Many towns regulate fence height (commonly 6 ft in back yards, lower in front) and placement near sidewalks and corners. A quick call to the building department is cheaper than moving a fence.